QUICK USER GUIDE
Please read the below instructions before use
Connected to power supplies
The power supply is 220-240VAC 50 Hz
the specification of the socket is 10 A 250 VAC
For connection of the drainpipe: Put end of the drain into a sink or bucket.
Fix the drainpipe to the back pipe of the machine. The interface is
fitted with clamps and tightened with a screwdriver.
or
Fix the drain pipe with
suction cups
Add water into the dishwasher’s tank
Note:
Before adding water, you need to the press power
1
button to turn on the dishwasher
There are two ways to add water into the tank:
1
Connect inlet hose to the tap;
2
Open the cap and add water into the dishwasher’s
tank manually
Drainpipe
Power cord
Water Inlet
or
There are two ways of checking the tank is full of water.
1.
Before starting:
When the tank is full of water, the machine will
beep fleetly for 3 seconds.
2.
After starting :
Water is not enough,
light is on
;
Water is enough,
light will be off and the machine will
beep for 3 seconds.
Remove the larger residue
Please remove excess food off plates
2
1
2