10
Timer Light Slide control Speed Power
Functional Operation
1
Power on, the hood will standby with backlight, backlight will be extinguished after 5
seconds without any operation, for using the hood again, touch any key to wake up it’s
standby motion.
2
Touch the power button
for 2 seconds, the hood will slide upwards
,
and works at the
first speed. Touch the power button
for 2 seconds again, the hood will slide downwards,
and stop working. If you stop the hood, without stopping the motor, when you open the hood
again, the hood will work at the speed it works last time.
2.1 Press the power button
, when the hood is coming upwards or going downwards, the
hood will stop moving, with motor keeping running. Press the power button
again,
the hood will move again.
3.
Motor on/off and speed setting:
3.1 Touch the speed button
, the motor will turn on; touch it again, it will turn off.
3.2
、
How to set the speed? Touch this area
,
with your finger sliding on it. When your finger stops at the first or second point, the motor
will run at the lowest speed; when your finger stops at the third or fourth point, the motor will
run at the second speed; when your finger stops at the fifth or sixth point, the motor will run
at the third speed; when your finger stops at the seventh or eighth point, the motor will run at
the highest speed.
4.
Lighting:
:
4.1. After the hood slides up, the lights will turn on automatically in 8-10 seconds.
4.2 Touch the button of light
, lights will turn off. Touch the light button
again, the
lights will turn off.
4.3 When you touch the button of light
, the pilot light is flashing. Slide the button
to control the light intensity when the pilot light is flashing. When enter into the controlling of
light intensity, the silde button
control the light intensity. There is 8 speeds of slide
button when lighting, every speed means one light intensity. When touch slide button
and slide to one light and it will be on, the light will be on in corresponding light intensity. It can
