36
Fixing the double oven
Lift oven into housing unit as shown below, do not lift the oven with the handle
otherwise the glass door might shatter.
Once the oven has been lifted into place insert the 4x plastic washers [05] into
the holes located within the sides of the metal casing of the oven as shown and
secure with 4x screws [06] [Ø4mm x 25mm].
Also ensure that you adjust the furniture doors adjacent to the sides of the oven
so there is a 5 - 7mm gap between them, otherwise heat displaced from the oven
might damage the furniture door.
02
03
[05]
x 4
Note:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
[06]
x 4
[05]
[06]
