21
In
more
detail...
GB
IE
CLPYR0-23 Built-in electric oven
Operation
13. Press the button to cancel the set operation time and temperature
(steps 7 and 8). The time and temperature flash on the display. Proceed as
described in steps 7 to 9 to change and confirm settings.
14. Press the button twice to cancel the timer function. The display shows the
actual time.
Note:
The full automatic timer setting is not available for the oven light
function and for the defrosting mode.
When the alarm function is activated (→
Setting an alarm time
), the
full automatic timer cannot be set.
Setting an alarm time
You have the possibility to set a timer to remind you to turn on the oven. You can
also use this function as a kitchen timer to set a time frame for other tasks not
necessarily related to this oven. The timer can be set in a time frame between a
minimum of 1 minute and a maximum of 9 hours.
Note:
This function can only be activated when the oven is in
standby-mode and not in operation.
1. Press the button on the control panel to enter the setting mode.
2. Use the thermostat knob to set the hours. Only a setting between
0
and
9
is possible.
3. Press the button to confirm the setting.
4. Use the thermostat knob to set the minutes (0 to 59).
5. Press the button to confirm the setting. The time is displayed and ":" blinks
to indicate the activation of the timer function. The icon appears and stays
on the display. The countdown starts.
6. When the set time has been counted down to
00:00
, an acoustic signal
sounds 10 times. The icon disappears from the display.
Cancelling the timer function
7. Press the button to cancel the timer before completing the settings.
8. Press the button twice to cancel the timer function after the timer has
been set.
CLPYRO23-C&L-A5-GB-IM-V08-141107.indd 21
11/7/14 2:54 PM
