26
In
more
detail...
CLIND2BK-C Induction Hob
GB
IE
Care and maintenance
•
The surface of the induction hob may be easily cleaned in the following way:
Type of dirt
Cleaning method
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
1. Switch the power to the cooktop off.
2. Apply a cooktop cleaner while the glass is still warm
but not hot.
3. Rinse and wipe dry with a clean cloth or paper towel.
Boil overs, melts,
and hot sugary spills
on the glass
Important:
Remove stains left by melts and sugary food
or spillovers as soon as possible. If left to
cool on the glass, they may be difficult to
remove or even permanently damage the
glass surface.
Remove these immediately with a fish slice, palette
knife or razor blade scraper suitable for ceramic glass
cooktops.
Beware of hot cooking zone surfaces!
1. Switch the power to the cooktop off at the wall.
2. Hold the blade or utensil at a 30° angle and scrape
the soiling or spill to a cool area of the cooktop.
3. Clean the soiling or spill up with a dish cloth or paper
towel.
Spillovers on the
touch controls
1. Switch the power to the cooktop off.
2. Soak up the spill.
3. Wipe the touch control area with a clean damp
sponge or cloth.
4. Wipe the area completely dry with a paper towel.
Note:
The cooktop may beep and turn itself off, and the
touch controls may not function while there is liquid on
them. Make sure you wipe the touch control area dry
before turning the cooktop back on.
Warning!
Cut hazard
!
When the safety cover is retracted, the blade in a scraper is razor-
sharp. Use with extreme care and always store safely and out of
reach of children.
Care and maintenance
