33
In
more
detail...
GB
IE
Troubleshooting
Troubleshooting
Fault
Cause
Solution
White stains left
on crockery.
Not enough detergent
added to dispenser
compartment.
If you used a phosphate-free
detergent, try a detergent
containing phosphates and
compare results.
Amount of rinse-aid set
too low.
Adjust rinse-aid to a higher
setting.
Although water is quite
hard, no salt is filled into
the appliance.
Add salt to the correct level.
Salt container cap not
screwed tight.
Secure the cap tightly.
Lower spray
arm rotates with
difficulty.
Spray arm is blocked
by small items or food
remains
Clear the obstruction.
Remains of
food are stuck
to the dishes,
cutlery, etc.
Dishwasher not loaded
properly. Water jets could
not reach all parts of the
dishes, etc. Too many
items in rack.
Reload the appliance.
Items in rack touching
each other.
Reload the appliance.
Not enough detergent
added.
Add more detergent.
Selected wash program
not intensive enough.
Select the intensive wash
program.
Filters blocked.
Clear the obstruction.
Filters incorrectly
installed.
( Care and maintenance).
Dishes, cutlery,
etc. not dried
well.
Amount of rinse-aid is set
too low.
Alter the amount of rinse-aid.
Items removed from
dishwasher just after
wash cycle done.
Wait a few minutes before
removing dishes for thorough
drying.
BDW60MCL-C&L-IM-V01-EN.indd 33
12/19/14 2:45 PM
BDW60MCL Dishwasher
