25
In
more
detail...
GB
IE
Operation
Switching on the dishwasher
1. Open the door.
2. Draw out the racks. Load them with dishes and push them back. It is
commended to load the lower rack first ( Loading the dishwasher racks).
3. Load the dispensers ( Loading the rinse aid dispenser & loading the
detergent dispenser).
4. Insert the power plug into a suitable electrical socket.
5. Turn on the water tap. Make sure that the water supply is turned on to full
pressure.
6.
Switching on:
Press the on/off button on the control panel.
7.
Selecting program:
Press the program button
P
repeatedly. Available
programs:
Intensive
/
Normal
/
ECO
eco
/
Glass
/
1Hour
1h
/
Rapid
8.
Selecting wash zone:
Press the
Alt
button repeatedly. By default, both upper
and lower racks are selected for washing.
9. Close the door. After about
10
seconds, the dishwasher starts automatically.
10. When the program is done, the dishwasher beeps for
8
seconds. It then stops
automatically.
11.
Switching off:
Press the on/off button .
12. Turn off the water tap and open the door.
13. Wait at least
15
minutes before unloading the dishwasher to avoid touching
the dishes while they are still hot and more susceptible to breakage.
Warning!
Do not open the door while washing!
Danger of burns!
Caution!
• Hot dishes are sensitive to knocks. Do not remove them
immediately after wash cycle done!
• Open the door carefully. Leave it ajar and wait a few minutes
before removing the dishes. In this way they will be cooler and
better dried.
• Empty the lower rack first, then the upper one, and the finally the
cutlery rack. This will avoid water dripping from the upper rack
onto the dishes in the lower rack.
BDW60MCL-C&L-IM-V01-EN.indd 25
12/19/14 2:45 PM
BDW60MCL Dishwasher
