28
1. Slacken the retaining screws (
1
) on the appliance and then carefully remove the
appliance door.
2. Place the appliance door on a cushioned surface, so that damage does not occur to it.
3. Lever off the cover caps (
3
).
4. Remove the door retaining screws (
2
) and then reverse the position of the top and
bottom hinge (as shown in above diagram).
5. Reattach the appliance door and then fully re-assemble the retaining screws (
1
) and
the door retaining screws (
2
).
6. Insert the cover caps (
3
) into the holes that are now exposed on the right hand side
of the cabinet.
2
1
3
Reversing the door
•
This procedure MUST be completed before the cabinet door is attached.
•
Any parts that you remove from the appliance whilst reversing the door, should be
retained for later use.
Warning!
Take care when opening the hinges, they are sprung loaded and there is the
risk of injury if they close on your hand.
02
