14
In
more
detail...
EN
Built under freezer
CLBFZ60
Operation
Product functions
Before switching on
•
Make sure that it has been installed by a suitably qualified person, as per the
information contained in installation instructions.
•
After delivery, wait for 4
hours before connecting the appliance to the mains
supply. This will allow any refrigerant gases that may have been disturbed
during the transportation process to settle.
•
The outside of the appliance and the removable accessories contained within
it, should be cleaned with a solution of liquid detergent and water.
•
The interior of the appliance should be cleaned with a solution of sodium
bicarbonate dissolved in lukewarm water. The interior and accessories should
be thoroughly dried, after the cleaning process has been completed.
•
There can be an odour when first switch on the appliance. It will lessen as the
appliance starts to cool.
Before first use
•
Set the thermostat dial to <
6
> or <
7
> for 2 hours after switching on the
appliance for the first time.
•
When first switch on the appliance, the compressor will run continuously until
the freezer reaches a sufficiently cool temperature.
•
During this period of time, try not to open the door frequently
•
Do not place large amounts of food into the appliance either.
•
If the unit is switched off or unplugged, allow at least 5 minutes before
restarting the appliance.
Switching on the appliance and setting the thermostat
Switch on your appliance by connecting it to the mains supply and setting the
thermostat. The thermostat control dial is located at the bottom of the appliance.
