Manual CC 6357
19
3. Press the SET button.
4. Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET
button. Repeat this to enter multiple letters. You can enter up to 15 letters.
Note
• If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter,
change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to
be edited, move the cursor to the letter to be inserted and then press the SET button.
5. Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the
screen. Select the position to display the title on the screen by using the 4 direction buttons and press
the SET button. When the position is determined, select ’END’ and press the SET button to return to the
SPECIAL menu.
●
SYNC: In areas where the supply is at 60Hz, you can synchronize the output phase
of multiple cameras using the power synchronization function (Line-Lock) without using a
synchronization signal generator.
- INT: Internal Synchronization Type
- L/L: Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase between 0 and 359.
Note
• When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC. menu is fixed to the ‘INT’ mode.
●
MOTION DET:
If you connect an alarm device to this camera, you can monitor activity more efficiently, because a
signal is generated by the camera whenever motion is detected. The motion detection signal is output
through the MD OUT port.
