Manual CC 5308
20
●
CAMERA TITLE:
If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates
'CAM TITLE'.
2) Set it to 'ON' by using the Left and Right buttons.
3) Press the SET button.
4) Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET
button. Repeat this to enter multiple letters. You can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press the SET button. The entered title appears on the
screen. Select the position to display the title on the screen by using the 4 direction buttons and press
the SET button. When the position is determined, select 'END' and press the SET button to return to the
SPECIAL menu.
Note
• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you enter
one.
• Only English is available in this mode.
• If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter,
change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to
be edited, move the cursor to the letter to be inserted and then press the SET button.
•
SYNC:
In areas where the supply is at 60Hz, you can synchronize the output phase of multiple
cameras using the power synchronization function (Line-Lock) without using a synchronization signal
generator.
- INT: Internal Synchronization Type
- L/L: Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Note
• When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
•
Motion Det:
This product has a feature that allows you to observe movement of objects in 8 different
areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is
detected. you can monitor activity more efficient.
1) When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow
indicates 'MOTION DET'.
2) Set up the mode using the 4 direction buttons.
- SENSITIVITY: You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
