Manual CC 5308
13
Exposure
1.
When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down
buttons so that the arrow indicates EXPOSURE.
2.
Select a desired mode using the Up and Down buttons.
●
SHUTTER: You can select either auto or manual shutter.
- A.FLK: Select this when you experience picture flicker, which can happen when there is a clash with
the frequency of the installed lighting.
- ESC: Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is
automatically controlled depending on the ambient illumination of the subject.
- MANUAL: You can control shutter speed manually. (1/60 ~ 1/120,000)
Note
• When you use a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the
installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
●
AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the higher the
noise.
- OFF: Deactivates the AGC function.
- LOW: Allows automatic gain control from 5.3dB to 32dB.
- HIGH: Allows automatic gain control from 5.3dB to 37dB.
●
SENS-UP: When it is night or dark, the camera automatically detects the light level and maintains a
clear picture if this mode is activated.
- OFF: Deactivates the SENS-UP function.
- AUTO: Activates the SENS-UP function.
