Conviron PGW40, Руководство оператора

Страница: 9 / 29

September 10, 2020 | 296742-ENG R00 1
1
PRECAUTIONS
The equipment is intended to be installed, operated, maintained, and serviced by only trained
personnel, according to the instructions and precautions described in the manuals provided by
Conviron.
Table 1-1 list precautions intended to help guide the user in the safe operation of Conviron
chambers.
1.1 Hazard Identification Symbols
Table 1-1 Hazard Identification Symbols
Symbol Description
The ″
HAZARD WARNING
″ symbol is used whenever a general hazard exists which
could cause personal injury or potential equipment damage, and requires correct
procedures/practices for prevention.
The ″
IMPORTANT INFORMATION
″ symbol is used to identify operating procedures
which must be followed to ensure smooth and efficient equipment operation.
The ″
ELECTRICAL SHOCK/ELECTROCUTION
″ symbol is used to identify a
source of potentially dangerous electrical current.
The “
ELECTROSTATIC DISCHARGE
” symbol is used to identify equipment which
is sensitive to electrostatic discharge.
The ″
BURN HAZARD/HOT SURFACE
″ symbol is used to identify surfaces which
are hot enough to cause personal injury.
The “
SLIPPERY SURFACE
” symbol is used to identify a potential hazard caused
by a slippery surface.
The “
MOVING PARTS
” symbol is used to identify a potential hazard from moving
parts inside the machine compartment.
The ″
PROTECTIVE EARTH-GROUND
″ symbol is used to identify the protective
earth connection.