Conviron GEN1000-GE, Руководство оператора

Страница: 38 / 54

GEN1000-GE Operator Manual
30 November 8 2019 | 291180-ENG R00
5. Remove the brackets. The lamp fixture assembly should remain in place (Figure 6-3).
6. Use a 1/4
″ wrench to loosen the hex-head cap screws (Figure 6-4) on the top and
bottom of the lamp fixture assembly, and remove the end caps.
7. Empty the contents of the lamp fixture assembly (Figure 6-5).
Figure 6-3 Remove the Brackets Figure 6-4 Remove the Hex-Head Screws
Figure 6-5 Remove the Lamp Fixture Contents