Conviron GEN1000-GE, Руководство оператора

Страница: 24 / 54

GEN1000-GE Operator Manual
16 November 8 2019 | 291180-ENG R00
3.7 Connect the UPS, Communication, and Central Alarm Contact
Connect the UPS, communication, customer alarm, and condensate pump connectors to the
ports on the rear of the chamber as shown in Figure 3-9 and described in Table 3-2.
Figure 3-9 Back Panel Connections
Table 3-2 Back Panel Connection Descriptions
Item Description Usage
1
Power Cord
Plug the power cord into a receptacle on a dedicated
circuit after all other connections have been made.
2 A/C Power to UPS
The UPS has two connection cables. One is power
to the UPS and the other is power from the UPS to
the control system. The plug and receptacle are
keyed and dedicated to the UPS and should not be
used for any other
3 Backup A/C Power From UPS
4 Central Alarm Contact (CAC)
The receptacle is dedicated for the CAC connection.
The receptacle is mated with the plug and then
screwed tightly together.
5 Optional Condensate Pump Connection
This receptacle is dedicated for the drain pan pump
which is a purchasable option. The plug is mated
with the receptacle and then screwed tightly together
6
RJ-45 Communications Port
Connect an RJ-45 terminated cable to the facility
network.
6
1
2 3
4
5
The Central Alarm Contact is rated for 230VAC at 0.5 amperes.