background image

Page 4 of 12 

1. General and function 

 
The optical smoke alarm is available as an optional extra for the Marmitek 
security systems of the types:  Homeguard MS8000,  security system 
MS9470,  security system MS9770,  Marmitek  security system  base  station 
SC2700 and SC2800. 
It can detect incipient low temperature fires and open fires with smoke 

development and should be in installed every  room. The smoke detector 
operates according to the dispersed light principle. For this a light transmitter 

and receiver are arranged in a measuring chamber in such a way that the 

transmitter light does not fall directly on the receiver. The development of 
smoke causes the light to be dispersed by smoke particles and picked up by 

the receiver. In contrast to  many products on the market no radioactive 
substance is necessary for the optical smoke detection. 

 
The smoke detector will impress you owing to the following features: 
 

 

Monitoring of rooms for the development of smoke 

 

 

Integrated signal transmitter 

 

 

Alarm transmission even for non-activated alarm unit 

 
 

2. Intended use 

 

The radio smoke detector is intended for signaling of smoke in interiors with 
optical and acoustic warning as well as signaling  by radio over distances up 
to 30 meters (free field range). 

 
It does not sense gas, heat or flame! 
 
The equipment may not be modified under any circumstances (otherwise all 
warranty claims have been void!).  
 

 
 

Содержание Type 3













Отзывы: