Page 9 of 12
•
Using the two screws and plastic wall plugs (all supplied), attach the
bracket to the wall.
•
Line up the slot of the backet
and the detector. Push the
detector onto the mounting
bracked and turn it clockwise
to fix it into place. Pull
outward on the detector to
make sure it is securely
attached to the mounting
bracket.
•
Do not
insert the battery at this stage (9V). Please follow the steps of
the next chapter before you insert the battery.
•
How to install the battery:
•
The smoke detector requires an alkaline battery
•
Match terminals on the end(s) of the battery with opposite terminal
connectors on the detector. Be sure to insert the alkaline battery in
the position shown on the detector.
•
When terminals are properly matched, push battery firmly in until it
snaps and cannot be shaken loose.
The smoke detector will not work until you insert the battery
properly!
