•
Output Video System/ Picture Adjustment Indicators:
Each of the six indicators on the top row represents two different meanings:
-
When the LED illuminates constantly (where there is no blinking), it represents
output video system- SECAM, PAL N, PAL M, PAL, NTSC 4.43 and NTSC 3.58.
-
When the LED blinks, it represents one of the five adjustment parameters- sharpness,
tint, colour, bright and contrast.
Output system select-
Use Select and + buttons
When your press “Select” button repeatedly, it will toggle through various picture
adjustments and output systems. Once the LED has circled through to the output system
(where there is no blinking), press the + button repeatedly to choose your desired output
video system.
Picture Adjust- Use Select and +/- buttons
When you press the “select” button continuously it will toggle through your desired
picture adjustment parameter, then use +/- button to increase/decrease setting value
Rear Panel
1.
Video Input-
This is the Composite Video input port. Connect the port to your
device using a RCA connector cable.
2.
S-Video Input-
This is the S-Video input port. Connect the port to your device
using a mini-din connector.
3.
Power- DC 15V Center Negative-
This is the power supply input port. Connect
the power supply to the port.
4.
Video Output-
This is the Composite Video output port. Connect the port to your
device using a RCA connector cable.
5.
S-Video Output-
This is the S-Video output port. Connect the port to your device
using a mini-din connector.
* The unit will automatically detect the video input (Video/S-Video) when either one of
the input is connected. When both inputs are connected, S-Video input has the preference
over composite video.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
