Operation Controls and Functions
Front Panel
•
Input Video System Indicator:
Auto, N3, N4, PAL, PAL M, PAL N, SECAM.
1. A illuminates when input auto detection mode is selected.
2. N illuminates when input system is set to NTSC 3.58.
3. N4 illuminates when input system is set to NTSC 4.43
4. PAL illuminates when input system is set to PAL (BDGIK).
5. PAL M illuminates when input system is set to PAL M.
6. PAL N illuminates when input system is set to PAL N.
7. SECAM illuminates when input system is set to SECAM.
Auto/Manual detection mode:
Press the “Select” button repeatedly until one of the six
LEDs on the top row light up steadily (so that there is no blinking), which means a video
system is selected. Then press the “Reset” button to switch between auto and manual
detection mode for the input. When auto mode is selected the “Auto” LED will illuminate
along with one of the system LED. When manual mode is selected use “–“ button to
select your desired input system.
•
Picture Adjustment controls:
1.
Select:
Press this button continuously to choose the picture adjustment you wish to
do. Each depression of the button will toggle through adjustment controls as follows-
contrast- bright- colour- tint- sharpness.
2.
+ Button-
Press the button for increasing picture effect value.
3.
– Button-
Press the button for decreasing the picture effect value.
4.
Reset-
When pressing the reset button, the setting of the selected control will be
reset to its default value.
* If you press reset for over 5 seconds, all controls will be reset to their default
values.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
