Converteam ALSPA MV3000e, Техническое руководство

Страница: 2 / 114

SAFETY INSTRUCTIONS
Care has been taken with the design of this product to ensure that it is safe.
However, in common with all products of this type, misuse can result in
injury or death. Therefore, it is very important that the instructions in this
manual and on the product are observed during transportation,
commissioning, operation, maintenance and disposal.
This technical manual should be regarded as part of the product. It should
be stored with the product and passed on to any subsequent owner or user.
Local safety laws and regulations must always be observed.
Persons working on the product must be suitably skilled and should have
been trained in that work for these products.
The product is a component designed for incorporation in installations,
apparatus and machines.
The product must not be used as a single item safety system. In
applications where maloperation of the product could cause danger,
additional means must be used to prevent danger to persons.
Product approvals and certifications will be invalidated if the product is
transported, used or stored outside its ratings or if the instructions in this
manual are not observed.
Third party approvals to safety standards UL 508C and CSA C22.2 No 14
are marked on the product.
In the European Union:
•
Products within the scope of the Low Voltage Directive,
73/23/EEC as amended are CE marked.
•
The product complies with the essential protection requirements
of the EMC directive 89/336/EEC as amended, when installed and
used as described in this manual. The requirements of the EMC
Directive should be established before any installation, apparatus
or machine which incorporates the product is taken into service.
•
A machine should not be taken into service until the machine has
been declared in conformity with the provisions of the Machinery
(Safety) Directive, 98/37/EEC.