Conversor TV Pro, Руководство пользователя

Страница: 9 / 24

9
Setting up Conversor Pro for the First Time
6.
How to Listen with Conversor Pro
Switch your hearing instrument to 'T', but do not adjust
its volume control.
Point the Microphone at a source of sound.
As you turn up the volume control on the Receiver, you
should begin to hear sound transmitted from the
Microphone clearly.
Conversor Pro Microphone has now taken over from
your Hearing Instrument. This is a bit like having the
hearing instrument microphone in your hand. When
Conversor Pro Microphone is set to the Omni-Directional
setting, you will not yet experience the full benefit of
Conversor Pro , but this procedure will help you to match
the sound level of the Conversor Pro with your hearing
instrument.
7. Checking the sound balance
When the Hearing Instrument is set to the “T” Setting, a
buzz may be heard if the Hearing Instrument is close to
strip lighting, computers or TV Screens. Consult your
Audiologist for advice on adjusting or replacing the
Telecoil for optimum use.
It is important to match the volume levels of your hearing
instrument with
Conversor Pro Receiver, so that you can
switch between the two without any increase or decrease
in sound level. Once the preferred sound level is
achieved, you are ready to try
Conversor Pro in the
Zoom setting.
8. Sockets and Connections
Conversor Pro microphone and receiver each have one
3.5mm Jack Socket which is used for both battery
charging (see page 6) and for connection to the Audio
Jack Cable and TV Adaptor Cable (see page 10)
supplied.
35918®Conversor Pro User Guide UK 16/9/08 10:48 Page 9