![Convergent Design Odyssey 7 Скачать руководство пользователя страница 41](http://html.mh-extra.com/html/convergent-design/odyssey-7/odyssey-7_manual_2659359041.webp)
CONTINUED »
RELEASE NOTES
FIXES & IMPROVEMENTS
FIXED AUD OUT (Headphones) unmute
FIXED Audio gain settings when switching Analog to SDI
FIXED Safe Eject process to remove OLED flashing during procedure
FIXED FS700 4K RAW -> HD Apple ProRes detection
IMPROVED 4K Apple ProRes playback
IMPROVED 4K pixel zoom 1:1 and 2:1
IMPROVED PSF output support in all modes
IMPROVED Reduced overall power usage
IMPROVED Interlaced playback support
IMPROVED 4K -> HD Apple ProRes playback
FIXED hdmi legalize input setting
SOFTWARE UPDATES
CD Apple ProRes Transfer Utility 1.7
LUTs viewed during recording noted in XML file metadata
KNOWN ISSUES
• 4K HDMI input, to HD HDMI output there are lines in the display. Note HD-SDI output does not
have this issue. Recording is unaffected.
• When using FS7 / FS700 4K -> 4K Apple ProRes or 4K -> 2K Apple ProRes, enabling color bars
with PSF on causes vertical stretching of color bars.
• When using color bars, do not power up the unit with a video source connected as this can result in
a black screen. Disconnect SDU or HDMI to remedy.
• Pixel Zoom in 2:1 does not reach the corners of the image in 16:9 or 17:9
• When applying certain LUTs Legal / Extended may need to be selected to match the camera / NLE.
• SSD Detection is longer than previous 5-10 seconds.
• Loading of SSD LUTS can take up to 30 seconds.
• Deletion of Custom LUT Folders not enabled at this time.
• Loading of any LUTs go to LUT User folders only.
•
Image Analysis Tool Overlays are slower than previous firmware (Lines on the display).
• When PSF output is selected OLED display is interlaced.
• Occasionally when viewing or recording 4K/UHD to 2K/HD SuperSample, lines can appear on the
OLED display. Recorded files as unaffected.
• IN FS700 4K Raw Burst mode (100p/120p), ten extra frames are recorded at the end of each
clip. Occasionally the are bad frames. This will be corrected in future firmware from 450 frames to
proper 440 frames.
• IN FS700 4K Raw Burst mode (100p/120p) -> 2K/HD Apple ProRes, the amount of frames that are
recorded may vary based on trigger type and clip to clip. Note the Odyssey always records 420+
frames in this mode.
• Graticules for Image Analysis Tools are not currently displayed on the SDI / HDMI outputs.
•
Occasionally on startup the firmware version number located under the Safe Eject button will report
“2015”. Engage/disengage F1 Screen Lock to reset to display “15.05”.
• Deleting luts does not always work reliably, deleted luts can reappear after a power cycle
Workaround: Resetting luts via the Odyssey->Reset menu does clear (delete) all custom luts
• Anamorphic Desqueeze is not supported in Canon Half Raw at this time.
• 1D LUTs are not support, only 3D Luts.
40
Содержание Odyssey 7
Страница 12: ...ANATOMY MECHANICAL DRAWINGS 11 ...