4.
1
specifications
-Your new PICCOLO is a fan heater partially enclosed.
-This heater is equipped with 2 fan forced heat levels : 750 w regulated with the electronic
thermostat and 1500 w fast heat on demand.
-Minimum obstruction and designed to heat your room quietly, consistant heat, it is
a perfect heater for your bathroom or other intermittently-used rooms.
-Your PICCOLO can be used with the optional
coNVEcTAiR
Programmer Module
(pilot wire) allowing scheduled temperature set-backs in periods of prolonged absence
providing the same comfort and more savings.
ReAD CARefuLLY :
These instructions are essential to install and use your new PICCOLO safely.
2
recoMMended set-up
-Your heater must be installed in accordance with national and local codes and
coNVEcTAiR
recommends an installation by a qualified electrician.
-Your heater must be installed so that the control panel is out of reach from anyone in
the bath-tub or in the shower. Do not install over a bath-tub or spa.
-Do not install the heater behind a door, furniture or others obstacles, or in front of an air
exhaust vent. keep combustible materials such as curtains, away from the heater.
-Your heater is equipped with a heating element that may reach high temperatures. Do
not install or operate in the presence of gasoline, paint solvents or other flammable
products.
-Maintain the minimum required clearances (height from floor, distances from side walls
or furniture, drapes, etc...)(fig. 2).
(Front Panel) (Front Panel) (Front Panel)
