10
P1 is now flashing
Using the “
+
” or “
-
” key, choose P2
Confirm with “
OK
”
Friday will be set the same as Thursday
Confirm with “
OK
” and go to Saturday to customize a program.
C) Choose a customized program
(for the weekend).
Saturday (6) is automatically selected following the last entry.
Using the “
+
” or “
-
” key, go to P= (a)
Press “
mode
”
The first cursor of the program is flashing (b)
Assign either a comfort or economy setting for each hour of the day using the “
+
” or “
-
” key
After completing the 24 hour cycle, confirm with “
OK
” and go to Sunday
For Sunday, use the same procedure as above, confirm with “
OK
” and go back to the original screen.
The programming schedule is now complete for the entire week
D)
Individual programming :
Neither pilot wire nor the 7392 RCP CASSETTE are necessary to control a single Convectair heating unit. A
single 7392 ECP programmer CASSETTE transmitter, can simply be installed in it’s compartment (see Fig.
1A)
E) Example of a programmable zone configuration :
The programmable zone will enable us to link a 7392 ECP CASSETTE
programmer to one or more RCP receiver CASSETTES. We can create 3
distinct programmable zones with 20 heater units each.
To protect your control system from outside and neighboring transmitters, the
Convectair 7392 ECP programmer transmitter is equipped with a four digit
Mother Code.
F) Home code programming :
You select the mother Code.
1.
Press on “MODE” for 4 seconds
2.
With the + or - keys select your digits (0 - 9)
3.
Press “OK” to accept
4.
Press “MODE” for next
When all 4 digits have been accepted, press “Mode” and go to the next screen.
(Assigning a zone)
G) Assigning a zone :
At the Transmitter 7392 ECP
Assigning will enable us to define the series of Convectair heater units (with