6.
- You must connect the ground wire of the heater (green wire
)
with the copper wire
.
- Never connect the pilot-wire (purple wire) to the electrical supply nor ground it.
- The purple wire with the seal at the extremity should not be used for the electrical
connection. It is used only if the heater is connected with the CONVECTAIR Programmer
system or the wall mount controller AWC.
- Fix the unit on the wall bracket before turning the power back on.
-
WARNING : To prevent short circuits and electrical shocks
WXUQWKHSRZHURႇDWWKHPDLQSDQHOEHIRUHDWWHPSWLQJ
the installation or making any repairs. If you are using a
SURJUDPPHUV\VWHPPDNHVXUHWRFXWWKHSRZHURႇ$//
electrical heating circuits of the heaters wired to the pilot wire.
- CONVECTAIR recommends that your heater be installed by a
TXDOL¿HGHOHFWULFLDQDQGLQDFFRUGDQFHZLWKQDWLRQDODQGORFDOFRGHV
- This heater must be connected to a 240 Volt (60 cycles) circuit and
with an appropriate breaker.
-
7KH¿UVWWLPH\RXU&RQYHFWDLUKHDWVDOLJKWVPRNHFRXOGEHUHOHDVHG
due to the burning of production residues. This is normal and should
disappear after 2 to 3 minutes.
!
RESPECT WIRE COLOR WIRING
4
ELECTRICAL CONNECTION
CANADA
CANADA
P
P
P ( P W ) = P U R P L E R = R E D B = B L A C K G = G R E E N C = C O P P E R
= Cables 3/12 or FAS
105 18/2 approved 300
volt.
*
*
