FIRST
RECEIVED
MONTHLY
EVERY 3
MONTHS
BOOM & SPREADER BAR
Check connections between Boom and Mast for
improper connection, looseness or wear.
Check the Boom for bending and deflection.
MAST
Check the Mast for bending or deflection.
BASE & FOOT PEDAL
Check bolts and nuts for looseness..
Check casters and axle bolts for tightness.
Check rubber parts on the casters for deflection
20
MAINTENANCE & INSPECTION
The operator of the lift shall inspect the ConvaQuip Lift before each
use. Check all bolts for tightness. Make sure the base can be easily
widened and that all lift parts are in place. Make sure that casters can
be turned freely, and that caster brakes can be engaged. Make certain
all necessary items (i.e. slings, wheelchairs, etc.) are ready for use.
At least once a month, the lift should be thoroughly inspected by
a person qualified to recognize any signs of wear and tear and
looseness of bolts or parts. Replace any worn parts immediately.
To lubricate, put a drop of oil on the following points when the
ConvaQuip Lift is placed into service and every month thereafter: Top
of Mast, Spreader Hinge, and Caster Axles.
FIRST
RECEIVED
MONTHLY
EVERY 3
MONTHS
BASE & FOOT PEDAL
Apply grease to caster ball bearings if
needed.
Check welding joints for rust and crack.
CLEANING
AS NEEDED
ACTUATOR & CONTROL BOX
Make sure the control box is firmly affixed
to the mast.
Make sure the actuator is secured to the
Boom and mast with pins and key rings
Make sure actuator plug into control box is
not loose.
SLINGS & SLING HARDWARE
Check sling for wear.
Check sling hardware every time before
use.
21
