OWNER’S MANUAL
|
2
1. Control panel
2. Display Panel
3. Body sensor
4. Front Grille
5. Handle
6. Remote holder
7. Air inlet grille
8. Power Isolation Switch
9. Base (Locking nut not shown)
10. Mains power cord
11. Remote control
ASSEMBLY
COMPONENTS LIST
REMOTE
When the heater power is on, the remote
control can be used to operate the heater from
up to 4m away.
If there are two or more heaters within this
distance all will be operated by the same
remote control.
Replacing the battery
Release battery slide by pressing on the tab at
the bottom of the remote. Remove the battery
and replace with an equivalent CR2032 type
battery.
Note: Your remote control will be supplied with
a battery.
ECO
1h
14°
18°
22°
26°
2h
4h
8h
1
2
3
4
5
6
7
8
10
ASSEMBLY
Unpack the heater components and check that
you have all of the components.
Turn the heater upside down and remove
the plastic Locking nut. Assemble the Base
onto the heater and lock into position with the
Locking nut.
Note: Ensure the nut is tight to avoid shaking
of the heater.
11
9
