Convair CoolTower CTF08, Руководство пользователя

Страница: 4 / 8

Assembly
Unpack the fan and check that you have
all of the components.
Remove the screws from the base.
Assemble the front and rear base stand
together onto the fan base, pulling the
cable through the central hole between
them.
Align the screw holes on the fan and
base.
Screw the base stand into position and
feed the cord through the retention slots
(Fig 2).
Component List
1 Control Knob
2 Air outlet
3 Front Base
4 Rear Base
5 Base Screw x3
6 Power Plug & Cord
2 CTF08
ASSEMBLY
Operation
To unlock the fan control, push the knob
inwards so that it protrudes from the
panel. Press the knob inward again to
lock the setting.
Select the desired fan speed by rotating
the control knob to the desired selection.
Your selection is indicated by the “ ” on
the control knob.
Your fan has 3 speeds and can oscillate
from side to side.
Refer to Fig 3 and the selection chart
below :-
Off position
Fan Speed Low
Fan Speed Medium
Fan Speed High
Oscillation On,Fan Speed Low
Oscillation On,Fan Speed Medium
Oscillation On,Fan Speed High
To turn the fan “OFF”, turn the knob to one
of the 2 “OFF” positions.
OPERATION
®
SEELEY INTERNATIONAL – OWNER’S MANUAL 3
1 2
3
1
3
5
4
6
2
3 SCREWS
Unit Controls