Convair ClimateMaster CM10W, Инструкция по эксплуатации

Страница: 13 / 20

Draining the Air Conditioner
Always replace the drain plug
immediately after draining.
To drain the air conditioner, place it over a
drain point before unscrewing the cap and
removing the drain plug, as water will flow out
as soon as the plug is removed.
Remove the plug at the bottom rear of the
appliance and allow the tank to completely
drain (Fig 13B).
Note!
End of season storage:
Always disconnect the air conditioner from the electricity mains before
cleaning or draining.
To maximize the efficiency of the air conditioner, clean regularly.
Cleaning the housing
Cleaning the filters
Never operate the air conditioner without the filters. Note!
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, spirits, detergents, chemically treated cloths, or
other cleansing solutions. These substances could possibly damage the cabinet
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt and
then rinse under running water (no hotter than 40°C).
Dry thoroughly before replacing.
Take care to replace the filters back into the slots in the cooler.
.
Remove the filters as shown (Fig 13A).
Drain any water from the unit.
Operate the unit in fan only mode for a few hours, to thoroughly
dry the inside.
Clean or change the filters.
Replace in the original carton or cover for storage.
Unplug and carefully store the power cord and plug end.
MAINTENANCE
9
B
13 A
Remove all filters (4 total)
from the air conditioner
and clean every 2 weeks.