Convair ClimateMaster CM10W, Инструкция по эксплуатации

Страница: 12 / 20

OPERATION
8
Air Conditioner Features
Step 6:
Timer Function
Step 7: Setting the timer
Your air conditioner has a SLEEP
mode, activated by pressing the button on
the control panel or remote control.
SLEEP mode will change the fan speed to
low and increase the set temperature by
1°C each hour for 2 hours.
No further
change will occur after the 2nd hour.
Sleep Mode can only be used during
Cooling mode.
The air conditioner is fitted with a timer
function. This can be set up to 24 hours
in advance. To use this function, the
cooler must be plugged in and ready to
operate.
With the air conditioner ON, press the
TIMER button on the remote control or
control panel. The control panel display
will flash and show the time setting. Press
the TIMER button to increase the time in 1
hour increments from 1 - 24 hrs. After 5
seconds the display will revert to the SET
temperature.
When the air conditioner is OFF (but still
plugged in), repeat the above to set the
ON time. The air conditioner will start up
with the last settings used.
When the air conditioner is working,
only the TIMER OFF can be set. When the
air conditioner is off, only the TIMER ON
can be set.
The timer function cannot be used for
dehumidifying mode.
Note!
How to cancel the timer
0 To cancel the timer, set the time to using
the control panel or remote control. The
TIMER indicator will stop glowing.