Convaid Cruiser CX10T Скачать руководство пользователя страница 5

Страница: 5 / 72

CONVAID USER’S GUIDE

READ BEFORE USE

Read manual completely before use and fully understand its content. Familiarize yourself with the

handling and functions of the product before use and practice them. Any caregiver that is going to

operate this chair should also read the manual in full.

You are responsible for the safety of the user. The safety of the user could be affected if you

do not follow the instructions in this manual. Nevertheless, not all possible circumstances and

unpredictable situations can be covered by this manual. Reason, care, and circumspection are

not features of the product; they are required of persons who use the product. If instructions are

not clear and further explanation is necessary, please contact your Convaid provider. If you do not

follow all instructions and warnings, damage to the chair or serious injury may occur. The latest

version of all instructions and product safety notice are available on the Convaid website www.

convaid.com and can be printed in larger sizes. Additional video instructions are also available for

reference purposes.

DEFINITION OF SYMBOLS

WARNING!

The word “WARNING” and/or the symbol shown above indicates

practices that are unsafe or dangerous and could result in serious injury or

death to the occupant of this chair or others.

WARNING!

READ INSTRUCTION MANUAL!

Additional symbols are defined throughout this manual along with

operating instructions.

This symbol indicates potential finger entrapment.

This symbol indicates correct lifting points for safe moving and handling.

This symbol indicates manufactured date.

This symbol indicates maximum user's weight.

Содержание Cruiser CX10T









































































Результаты поиска

Содержание Cruiser CX10T

Отзывы:

Похожие инструкции для Cruiser CX10T

Бренды по названию

Популярные бренды

Convaid Cruiser CX10T, Руководство пользователя

Результаты поиска

Содержание Cruiser CX10T

Отзывы:

Похожие инструкции для Cruiser CX10T

Бренды по названию

Популярные бренды