23
CONVAID USER’S GUIDE
Additional Footplate Height Adjustment
In the event that the footplate minimum height adjustment described
above is inadequate, additional adjustments can be made.
1. Pull out detent pin and remove the footplate extension tube from
the frame. Fig.67
2. Press the spring button, then pull the foot plate assembly apart.
Fig.68
3. Insert the footplate into the opposite end of the footplate
extension and reassemble. Fig.69
4. Using an Allen wrench (included), remove both bolts from the
housing bracket on the frame. Flip the bracket upside down and
replace bolts. Fig.70,71
5. Return the footplate extension tube to the housing bracket and
secure with detent pin. Fig.72
Footplate Height Adjustment
Fig. 65
Fig. 66
Fig. 67
Fig. 68
Fig. 72
Fig. 71
Fig. 70
Fig. 69
Seat-to-footplate height is measured from the back of the knee to the bottom of the
heel. Feet or heels should rest comfortably on top of footplate. Fig. 65
Seat to footplate height
All Convaid footplates are height adjustable. Footplates
swing away for access or folding.
Pull on ring to remove detent pin
holding footplate in place. Move
footplate up or down, realign holes and
install detent pin through holes in tube.
Fig.66
