GB
40
Installation by authorised
technician
This manual contains instructions about
how the stoves must be assembled and
installed. To ensure the function and sa-
fety of the stove, we recommend that the
installation is carried out by an authorised
technician. Contact one of our dealers who
can recommend suitable technicians.
Building application
These main instructions may give guidance
which would contravene national building
regulations. Please refer to supplementary
instructions or ask your local authority for
advice regarding building regulations.
Before installing a stove or erecting a
chimney it is necessary for you to make
a building application permission to your
local authority.
Structural support
Check that the wood joists are strong
enough to bear the weight of the stove and
chimney. The stove and chimney can usu-
ally be placed on a normal wooden joist in a
single occupancy house if the total weight
does not exceed 400 kg.
Hearth plate
Due to the risk of falling embers, a flam-
mable floor must be protected by a hearth
plate. It must extend 300 mm in front of
the stove and 100 mm on each side of the
stove, or have a 200 mm extension on each
side of the opening. The hearth plate can
consist of natural stone, concrete, metal
plate or glass. A painted metal or glass
hearth plate is available as an accessory
for these models.
Important to remember!
FACTS / PRIOR TO INSTALLATION
Prior to installation
1
2
3
4
Technical details
Output
3 – 7 kW
Nominal output
5 kW
(approx. 1.5 kg wood/
hour)
Efficiency, up to
79%
Connector ext.
Ø150 mm
Weight
100 kg
Width
500 mm
Depth
440 mm
Height
740 mm
Type approved in accordance with:
European standard EN-13240 class 1
Swedish environmental and quality marking, P-
marking cert. no. 22 03 09
Swedish type approved, cert.no. 0222/03
Norwegian standard NS 3059, Cert. No. 043-140
German standard DIN 18.891, RO-91 03 529
Danish standard DS/EN 13240 plus, id no. 598
If the insert needs bedding down to
be moved or if the pillar foot is to be
installed, remove any loose components.
When the stove is installed reinstall the
components in reverse order.
1 Fire bars
2 Grate disc
3 Heat deflector
4 Hearth cladding