GB
53
HK
HK
HK
HK
30 mm
For this type of connection, first remove the valance
that sits in front of the back plate's air intake.
In the case of connection through the floor, first
remove the knockout in the guide plate and any
hearth plate.
SUPPLY AIR/ACCESSORY
Supply of combustion air
When a stove is installed in a room, the air supply demand to the
room increases. Air can be provided indirectly via a vent in the
outer wall or via a duct from the outside that is connected to the
connector on the underneath of the stove. The amount of air
needed for combustion is approx. 25m
3
/h.
The connector has an external diameter of 67 mm. When installing
ducts longer than 1 m, the pipe diameter must be increased to 100
mm and a correspondingly larger wall vent must be selected.
In hot areas, the duct should be insulated with 30 mm mineral
wool covered with a moisture barrier (plastic). It is important that
the lead-in, between the pipe and the wall (or floor), is sealed
using jointing compound.
A 1 m length of condensation-insulated ducting for combustion air
is available as an accessory.
Installation variants
