CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 10 -
CONTROLLER SETUP MENUS
QUICK SETUP
The Quick Setup menu is available to allow a user to quickly set up the basic configuration of the
control panel to match the engine. Selections in the Quick Setup will propagate into other areas of
the control panel programming. For more detailed options, you can use the main menu structures
that follow.
Heading
Default
Range
Engine Manufacturer
Kubota (DPF)
Kubota (DPF)
TSC Min Speed
800
650-4000
TSC Max Speed
2900
650-4000
Performance Display
Off
On/Off
PARAMETER CONFIGURATION
The Parameter Configuration menu allows you to configure each critical engine parameter to the
source of the information. Sender type, scale and input channel to the module can be selected here.
You will first select the parameter, then the properties associated with each one.
Heading
Default
Range
Parameter
Fuel Level
Voltage
Hour meter
Fuel Level Sender
S-W
SW/VDO/0-90ohm
Fuel Channel
Plug A Pin 5
No Options
Voltage Source
Elect-J1939
Batt-J1939/Alt-J1939/Elect-J1939/Internal
Batt Volt Trim (100mV) (Internal Only)
0
Hour meter
Engine ECU
Internal/Engine ECU
Hour meter (Internal Only)
0 Hours
