- 16 -
CONFIGURATION MENUS
(2)
Engine Parameter Configuration
Engine Type (Leave as Electronic, DO NOT CHANGE)
Parameter Selection (Speed, Coolant Temp., Oil Pressure, Fuel Level,
Voltage, Hour Meter)
Parameter Setup (Varies based on parameter)
(3)
Input Configuration
Configure Selection (Default = Channels, optional Custom Message)
Digital Input Selection 1-9
Digital Action Selection
Digital Message Selection
Digital Delay
Digital Polarity (NO, NC)
(4)
Output Configuration
Output Relay Selection 1-8
Relay Function Selection
Relay Polarity (Positive, Invert)
Relay Initial State
Relay Allow Power Down
(5)
Throttle Configuration
Throttle Type - Throttle Type Selection (Default = TSC Vernier)
TSC Mode Selection (Default = Primary)
TSC Min Speed Selection (Default = 800 rpm)
TSC Max Speed Selection (Default = 2400 rpm)
TSC Bump Speed Selection (Default = 20 rpm)
TSC Ramp Rate Selection (Default = 100rpm/sec)
Throttle Curve Selection (Default = Linear)
Multistate Speed 1-4 Selection
(1)
Quick Setup
NOT TO BE USED FOR THIS CONTROLLER
