SALT REQUIREMENT
ChlorMaker can generate both Chlorine or Bromine. It all depends on which sanitizer the user prefers. Use So
-
dium Chloride Salt if you prefer Chlorine Generation and Sodium Bromide Salt if you prefer Bromine. Please Note:
Each salt requires a different level of salinity for ChlorMaker to operate effectively.
CHLORINE SALT - SODIUM CHLORIDE (NaCl): Raise Salt Level to 2,000 PPM (Parts Per Million).
Ap-
proved salts include “pool salt” made for salt water chlorine generating systems, canning and pickling salt from
your local market, and some water softener salts that are 99% pure sodium chloride or better. Some high-end,
mineral enriched salts can be used but require higher quantities to achieve 2,000 PPM sodium chloride salt
level. These approved salts are generally available at pool & spa supply stores, home improvement centers and
On-Line stores in a variety of sizes.
Never use rock salt or salts that have more than 1% “anti-caking agents”,
“yellow prussiate of soda”, or “sodium ferrocyanide”. These compounds may cause surface staining.
Please use
chart below.
BROMINE SALT - SODIUM BROMIDE (NaBr): Raise Salt Level to 3,000 PPM (Parts Per Million).
There
are several manufacturers of Sodium Bromide Salt to choose from. Please make sure the Sodium Bromide you
purchase is 99% pure or better. Ask your local pool and spa dealer for assistance. Please use chart below.
Chart is Based on 100 Gallons or 379 Liters of Spa Water
SALT TYPE
POUNDS
CUPS
99% Pure Sodium Chloride (NaCl) - Pool, Pickling, Canning &
Other Fine Grain Salts
1.4
2.3
99% Pure Sodium Chloride (NaCl) - Water Softener & Other
Coarse Grain Salts
1.5
2.5
Hymalayan Salt Fine Grain Salt (Mineral Enriched)
1.8
2.9
Dead Sea Salt Coarse Grain Salt (Mineral Enriched)
2.5
5.0
99% Pure Sodium Bromide (NaBr) Fine Grain Salt
2.5
4.0
The amount of salt to add and dissolve is dependent upon the size of the spa. Determine the volume of water in
gallons or liters by checking the spa owner’s manual or use any internet volume calculator.
99% Pure Sodium Chloride (NaCl) Coarse Grain Example For a 350 Gallon Spa: Divide 350 Gal by 100 Gallons
then multiply answer by 2.5 Cups. (350 / 100 = 3.5 x 2.5 = 8.75 Cups)
99% Pure Sodium Bromide (NaBr) Fine Grain Example For a 1,326 Liter Spa: Divide 1,326 Liters by 379 Liters
then multiply answer by 4.0 Cups. (1,326 / 379 = 3.5 x 4.0 = 14 Cups)
Simply pour the recommended amount of salt directly into the spa water to bring the concentration to the recom
-
mended level. Turn the spa jets on to help dissolve the salt. Warmer water will aid in dissolving the salt faster. If
the water is cold it may take several hours for the salt to fully dissolve.
WARNING: Do not turn ChlorMaker on until all the salt has fully dissolved.
SALT LEVEL INDICATOR
ChlorMaker will indicate if the salt level is within the recommended range listed above. When the “Generating”
LED light is on, the “Check Cell” LED light should be off if the salt is at the recommended level. Please see below.
Check Cell Light Flashing:
Salt Level Too High
Check Cell Light Off:
Salt Level Within Normal Range
Check Cell Light On (Not Flashing):
Salt Level Too Low
IMPORTANT: It is important to occasionally check that the lights are indicating proper salt level. Always
use Salt Test Strips to check the salt level and adjust the water according to the Test Strips. If Test Strips
Show Too High: remove some water from the spa and replace with fresh water. Re-test and adjust as nec-
essary. If Test Strips Show Too Low: Add salt. Re-Test and adjust as necessary.
