manualshive.com logo in svg

Controlli NC7311, Руководство пользователя, Страница: 23 / 73

Поделиться
Скачать
Controlli NC7311 Скачать руководство пользователя страница 23

USER MANUAL 

1

st

 Issue             10/00                        23

 

DMP025E

 

 

•

  The blinking cursor will place itself near the day of the week 

indication. 

•

  Push the key        until the cursor is before the datum, which has 

to be modified. 

•

  Press the key       or       until the required value appears. 

•

  Repeat the operation to edit all the other data. 

•

  Press the key            . 

•

  Push the key      ..: The related red signal will stop blinking.  

 

F

  If it is set a date which is not suitable to the selected month, 

after pressing the key            will appear, next to the number, the 
“?” sign with the cursor blinking on it. Therefore, it is necessary 
to correct the error and push the            key. If the error has been 
cancelled the “?” sign will disappear and all data will be 
accepted. 

 

F

  The programming manages leap year but not summer time. 

 

 
The operator has the possibility to decide, for each group, if the 

controllers have to operate in summer or winter mode. 

Opening or closing the corresponding digital inputs effects this 

setting. 

 

ENTER

 

Ã

 

PROG

 

ENTER

 

Ã

 

ENTER

 

Ã

 

Содержание NC7311










































































Отзывы:

Нет отзывов