3
Before
installing
Useful tools
Star screwdriver
Rotary hammer / screwdriver
Precautions
The sensor must be installed indoors, away from rain, snow
and avoiding direct exposure to solar radiation;
Handle with care avoiding to shake, bend or
disassemble the device;
Do not insert foreign objects into the device;
Do not expose the device to fire, explosive atmospheres, water
or other liquids;
Do not use / store the device in the presence of magnetic
fields;
Do not repair or replace device components, components
must be replaced by authorized Enerbrain personnel
Safety shoes
The builder declines
any responsibility in
the case of
:
Failure to comply with the safety rules indicated above;
Failure to comply with the instructions contained herein
manual;
Damage to persons or property resulting from incorrect
installation and / or improper use of products and
equipment;
Mandatory PPE
Protective gloves
Preliminary checks
Check that the location chosen for the installation of the probe
is far from heat sources (radiators, terminals, air handling unit
outlets, ...) and away from direct exposure to solar radiation.
Compliance with
EU legislation
The eSense device complies with EU legislation and has the
following certificates:
1
2
3
Magnet for switching on / off
Packaging content
eSense with PTC probe
Fixing anchors
PTC plate / eSense fixing screw
1
2
3
Via Carlo Levi 52, 16010 Sant’Olcese (GE) ITALY - Tel +39 010 73061 - [email protected] - www.controlli.eu
