Symbol management hot cold on controller request
On the STA70M sensor, on the left of the display, the symbols Cold
or Hot
will be shown depending on whether the temperature is
higher than the Cold Set or lower than the Heat Set.
Management of the Modbus address of the controller
STA70M sensor allows you to view and modify (Settings page -> Pa
-
ram) the Modbus address of the NR9001 controller stored in EEPROM
memory.
The address can be changed only if the controller Dipswitch is not
active.
If the STA70M sensor is present, the Modbus address cannot be set
by Supervision.
Contact our technical secretariat in this regard if the planned confi
-
gurations do not cover what is desired.
CONFIGURATOR
To manage the NR9001 controller, use the 1.6.3 release configurator
that allows you to manage the configuration of the different sensors
(STA60M, STA70M).
MT-NET-PONR operator panel
Release 2.8 is required to manage the NR9001 controller for MT-NET-
PONR supervision.
1
st
Issue
06/2019
DBL585e
Page 20
