ISO 9001
CONTROLLI S.p.A.
16010 SANT’OLCESE Genova - Italy
Tel.: +39 01073061
Fax: +39 0107306870/871
E-mail: info@controlli.eu Web: www.controlli.eu
USE
3F.. series valves are used to control fl uids belonging to the
group showed in the table in accordance to article 9 of 97/23/
CE (PED) directive, in air-conditioning, thermoventilation and
heating plants and in industrial processes; therefore, they cannot
be used as safety valves.
MANUFACTURING CHARACTERISTICS
They consist in a 3-way valve body to be assembled on electrical
bidirectional actuator.
MOTORIZED VALVES TECHNICAL CHARACTERISTICS AND PERFORMANCES
(
1
) For applications with possible ice formation on stem and packing,
see 248 accessory.
(
2
) Graphite packing for high temperatures; forced lubrication on extended
neck. Tefl on packing for low temperatures, see (
4
).
(
3
) Due to the bellows presence, the max applicable pressure must not
be higher than 5 bar
(
4
) For applications on fl uids from -10 to -20 °C replace letter P with the
T, e.g. 3FAA50T. In such case the max temperature is 230°C
(
5
) Double O-ring and graphite tefl on scraper ring.
(
6
) Group 1: water, overheated water, steam, diathermic oil.
For
different
fl uids belonging to group 1, please contact our Sales
Support.
Group 2: water, overheated water, steam.
For
different
fl uids belonging to group 2, please contact our Sales
Support
(
7
) PN25 only for 3FAA125 and 3FAA125P.
(
8
) Leakage is measured according to the EN1349 standard.
Three-way Mixing Globe Valves
3F..
Model
Technical data
3FGB
DN 25÷150
3FSA
DN 25÷80
3FSAS
DN 25÷80
3FAA
DN 25÷125
3FAAP
DN 25÷125
Construction
PN16
PN25
PN25
(3)
PN40
(7)
PN40
(7)
Body
cast iron
spheroidal cast iron
spheroidal cast iron
acciaio
acciaio
Seat
cast iron
stainless steel
stainless steel
stainless steel
stainless steel
Plug
forged brass
stainless steel
stainless steel
stainless steel
stainless steel
Stem (D 9mm)
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
Control characteristic
direct way = equal
perc.
Angle way = linear
direct way =
equal perc. (DN25÷65)
linear (DN80)
angle way = linear
direct way =
equal perc. (DN25÷65)
linear (DN80)
angle way = linear
linear
linear
Stem packing
EPDM O-Ring
(5)
Tefl on V-ring
stainless steel bellows
Tefl on V-ring
(2)
Max. fl uid temp. °C
150
230
300
230
350
Min. fl uid temp. °C
-10
(1)
-10
(1)
-10
(1)
-10
(1)
-20
(1) (4)
Fluid
(6)
Group 2
Group 2
Group 1
Group 2
Group 1
Connections
Flanged PN16
Flanged PN25
Flanged PN25
Flanged PN40 Flanged PN40
max Kvs leakage %
(8)
direct way 0,03
angle way 2
0,02
0,02
0,02
0,02
1
st
Issue
rev.
c
02/12
1
DBL317e