7. Connect access control as required to direction inputs on the logic controller.
See wiring diagram for more information.
8. Replace sensor panels and reconnect cables to sensors (if removed). Make any sensor
adjustments necessary (see sensor alignment instructions) and test lane to ensure
operation is satisfactory before replacing the front panels onto the cabinets.
9. Install the sheets of glass by remove the two screws holding the glass clips onto the
front panel. Once the glass is in place, reinstall the glass clip.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: (800) 942-0829 | Fax: (800) 942-0828 / Phone: (330) 273-6185 | Fax: (330) 273-4468
11
