Revision 2.6
WebRelay-Quad™
Users Manual
Section 3: Operation
WebRelay-Quad™ can be operated by using a web browser, by sending text commands to an
XML status/control page, or by sending Modbus/TCP requests.
3.1 Browser Operation
Once the unit is set up, the control page may be accessed by typing the following URL into the
web browser: http://192.168.1.2 (Note that if the IP address was changed, replace the default IP
address shown with the new address that was assigned. Note also that if any port is used other
than port 80, the port must also be included in the request: http://192.168.1.2:8000 ) The new
control page will appear. A control page with default settings is shown below.
Xytronix Research & Design, Inc.
page 28
