UD78 User Guide
Issue code: 78nu2
18
5 Related Parameters
5.1 Introduction
The parameters listed in this chapter are used for programming and
monitoring the UD78 when it is fitted in a Drive. Refer to the
Unidrive User
Guide
for programming instructions.
Warning
Before attempting to adjust any parameters, refer to the
Warnings and Notes at the beginning of Chapter 3
Setting up
the Drive
in the
Unidrive User Guide
.
Key
Type of parameter
RO Read-only
RW Read–write
...
selector
Select from a number of settings
...
enable
Make or allow a function to operate
...
indicator
The value can only be read
Limitations of use
R The Drive must be reset for a new value to take effect.
P Protected parameter; the parameter cannot be used as the
destination parameter for a programmable input.
Range
Bi Variable parameter having bipolar value range.
Uni Variable parameter having unipolar value range.
Bit Bit parameter
Symbols
ð
Default value
ô
Range of values
~
Indicates a range of values
(in the case of bit parameters,
~
indicates
or
).