Control Techniques UD55, Руководство пользователя

Страница: 17 / 20

UD55 User Guide
Issue code: 55nu3
13
7 Erasing the entire flash memory of the UD55
1
Ensure terminals 40 and 41 on the UD55 are connected.
2
Insert the UD55 in a Drive (refer to
Chapter 3, Inserting the UD55 in a
Drive ).
3
Ensure terminal 30 of the Drive Signal connector is open-circuit so that
the Drive does not become enabled when powered-up.
4
Re-fit the terminal cover to the Drive.
5
Connect the
AC
supply to the Drive.
6
Set parameter .00 (in any menu) at
3099
. All the parameter values are
now erased from the UD55.
Erasing takes from 2 to 14 seconds. When it is completed,
parameter .00 returns to zero.
7
Disconnect the
AC
supply from the Drive.
8
Remove the terminal cover (refer to Chapter 3, Inserting the UD55 in a
Drive ).
9
Remove the UD55 from the Drive.
10
If a small option module was previously fitted in the Drive, re-fit the
module.
11
Replace the terminal cover. The Drive can now be used.