Control Techniques FXM5, Руководство пользователя

Страница: 12 / 32

8
FXM5 User Guide
www.controltechniques.com Issue Number: 5
Using a Mentor II Drive
When using the FXM5 controller with a Mentor II Drive, ensure that terminals L1 and L3
of the controller are connected to the same phases as L1 and L3 in the Drive.
3.6.2 AC supply voltage
Figure 3-4 Locations of jumpers LK5 and LK6
Set jumpers LK5 and LK6 for the AC supply voltage. (This may be the voltage applied to
terminals L1 and L3, or E1 and E3 (see Using an alternative AC supply on page 7). Both
jumpers must be set for the same voltage.
3.7 Armature connections and fuses
Connections
Make armature connections to terminals A1 and A2 as follows:
Fuses
Protect each armature connection with a 2ADC fuse.
System control mode Connect...
Analog control Yes
Digital control No
External control of field current No
Internal control of field current No