SCADAWave Ultra JR5O
12
Quick Start Guide - Ultra JR50 Ethernet Data Radio
Step 6 - Activate Remote - PTP Wizard
Repeat steps (3) to (6) for the Remote radio.
Step 7 - Verify Modem Operation
The J Series Ethernet radio modems are now ready for operation. Allow 15 seconds for the
Remote radio to synchronise with the Access Point radio
Access Point LEDs
Pwr/Tx LED will be solid Green but flash Red once per second on Tx.
Remote Rx
Pwr/Tx LED will be Green and Sync/NoRX LED will flash Green once per second indicating the Re-
mote has synchronized with the Access Point.
Step 8- Embedded Diagnostics Testing
8.1 Review Access Point.
Start your web browser and insert the IP address of the J Series Access Point (as recorded in Step
6) into the URL. Once loaded, click on the Diagnostics option. This will display the Diagnostics
summary page. Review the diagnostics parameters checking for abnormal items such as high
VSWR (high TX reverse power) and lower than expected radio RSSI (Received Signal Strength).
8.2 Review Remote Radio.
Click on the sub-menu “Browse Network”. The remote radio will appear in the list (serial number
and unit type is listed). Click on the Serial Number of the Remote Radio. The browser will now
re-direct to the Remote radio. Click on the “Summary” TAB and the remote radios diagnostics can
now be reviewed.
