Control 4 C4-KNX-PS640MA, Руководство пользователя

Страница: 13 / 17

Control4
®
KNX
During a reset the bus line is disconnected from the output voltage and shorted. This restarts devices
connected to this bus line. The red Reset LED lights up for the duration of the reset. The LED goes off
when the reset is complete. A reset takes around 20 seconds.
If the line is to be disconnected from the voltage for an extended period, pull off the bus connection
terminals from the KNX power supply.
Reset via bus connection terminal
Pull off the device's bus connection terminal for approx. 20 seconds.