Contrel EMA11 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 58

Contrel EMA11 Скачать руководство пользователя страница 53

EMA11 - USER MANUAL

-53-

11.10)

ANALOG OUTPUT (OPTION)

Selecting the analog output voice, the following programming page
appears:

•

Out Index

, expresses the number of output to select or program, which

are present on the hardware of the instrument.

•

Type

, allows to select the value of current output, (disabled, 0-20mA, 4-

20mA).
Through the up & down keys, it may be possible to select the type of the
output current, by pressing the “ENTER” key the configuration is saved.

•

Measure Code,

is the measure (see cap. 12) to associate at the analog

output.

•

Min.

, full-scale value of the lower limit of the programmed value (Measure

Code).
Once the minimum full-scale has been programmed, the instrument
automatically will associate the minimum current value (0 or 4 mA) at this
value.

•

Max.

, full-scale value of the upper limit of the programmed value

(Measure Code).
Once the maximum full-scale has been programmed, the instrument
automatically will associate the maximum current value (20 mA) at this
value.

If the minimum end-scale value is lower of maximum end-scale value, the out of current will be directly
proportional at variable set, otherwise it will be inversely proportional. Minimum and maximum can be
negative value.

«
...
51
52
53
54
55
...
»

Содержание EMA11



























































Отзывы:

Нет отзывов