Contractor DBS-25RC, Руководство пользователя

Страница: 17 / 60

17
ENGLISH
CONTRACOR
®
DBS-25/50RC Art. 10510/10515
8.2. Field of Application.
The pressure vessels are intended for use only with the media and within the parame-
ters stated in the table above. The use for any other purpose is not allowed.
8.3. Set Up and Installation.
1. The vessels can be set up indoors or outdoors under a roof.
Safety-regulations and standards and fire-regulations and standards, depending on
the media used, must be observed when choosing a place for setup. When set up
outdoors, the minimal and maximum working temperatures must be observed.
2. The vessels have to be installed in such a way that they and all fittings and parts are
accessible for inspections, tests, maintenance and cleaning, from the inside and the
outside.
The type plate has to be accessible and kept clean so that it is readable at all times.
3. The main body is based on supports, stands or feet suitable for the strain of the
pressure test. The vessel must be set up on foundations with a stability suitable for
the strain of the pressure test.
8.4. Setting the Vessel to Work.
A. Conditions for setting the vessel to work.
1. The vessel can be set to work, including test operation, if:
— its condition does not pose a danger to people and environment,
— the system and equipment is complete, tested and meets the requirements
according to the documentation and applying standards.
B. Procedure before start up of the machine
2. Before closing the vessel make sure that there is no foreign matter or object inside.
3. Make sure that all inspection doors and flanges have the correct number of bolts,
that the bolts are inserted correctly in place and of the right length and tightened to
the correct torque.